Description
COPKO Manual Bar Bender
COPKO Manual Steel Bar Bender is now very popular. The bender is durable, easy to use, and cheap.
COPKO Manual Steel Bar Bender is used for bending small steel bar for construction work.
We have 3 types as follow;
 |  |  |
|---|---|---|
| COPKO Manual Steel Bar Bender 12mm. | COPKO Manual Steel Bar Bender 22mm. | COPKO Manual Steel Bar Bender 25mm. |
1) COPKO Manual Steel Bar Bender 12 mm.
COPKO Manual Steel Bar Bender 12mm.
Video: COPKO Manual Bar Bender 12 mm.
– suitable for all stirrups up to 12mm bar diameter
– selective bending around a fixed centre pin or sharp-cornered bending to get very small radius
– infinitely adjustable angle stop for producing accurate bends
– enabling all stirrups to be produced with identical bending angles
| Diameter of steel bar (rod) | Ø12 | Ø10 | Ø8 | Ø6 |
|---|---|---|---|---|
No. of Rods: MS- Round Bar of Tensile strength [85 kg/mm2] | 1 | 2 | 3 | 4 |
2) COPKO Manual Steel Bar Bender 22 mm.
COPKO Manual Bar Bender 22 mm.
Video: COPKO Manual Bar Bender 22 mm.
– It is used to bend steel bar up to 22mm.
– body arm made from hot forged
– two bending rollers made from heat treatments of quenching followed by tempering carbon steel
– 1.5 meters long lever helps reduce human effort required
– easy hand-adjustable stopper to fit in steel bar for simple operation
The bended angles of bar would be the same in every corner using an adjustable stopper which was fixed on the machine. This makes this machine had better safety than regular long bending key. This machine can also help you save cost and labor.
| Diameter of steel bar (rod) | Ø12 | Ø20 | Ø16 | Ø12 | Ø10 | Ø8 | Ø6 |
|---|---|---|---|---|---|---|---|
No. of Rods: MS- Round Bar of Tensile strength [65 kg/mm2] | 1 | 1 | 1 | 2 | 2 | 3 | 4 |
No. of Rods: MS- Round Bar of Tensile strength [85 kg/mm2] | – | 1 | 1 | 2 | 2 | 3 | 4 |
3) COPKO Manual Steel Bar Bender 25 mm.
Video: COPKO Manual Bar Bender 25 mm.
– rugged steel plate design
– two bending rollers made from hardened carbon steel
– both rollers can be switched in need of bending small radius
– 2 meter long lever helps reduce human effort required
– bend high resistance bars & bend several bars at once
Diameter of steel bar (rod) | Ø25 | Ø20 | Ø16 | Ø12 | Ø10 | Ø8 | Ø6 |
|---|---|---|---|---|---|---|---|
No. of Rods: MS- Round Bar of Tensile strength [65 kg/mm2] | 1 | 1 | 1 | 2 | 3 | 3 | 5 |
No. of Rods: MS- Round Bar of Tensile strength [85 kg/mm2] | 1 | 1 | 1 | 2 | 3 | 3 | 5 |
“Patented Products from the Department of Intellectual Property”
